Sand Washing Machinery
Sand washing machines use of advanced technology, combined with the actual situation of domestic gravel industry developed efficient washing sand equipment, wash it with a high degree of reasonable structure, production, the process of sand washed sand less wastage, in particular its drive parts and water, Sand isolation, and its failure rate is much lower than the commonly used sand washing machines, washing sand domestic industry is upgrading the best choice.
Application:
XZD series high efficiency sand washing machinery is a kind of rotary sand washing appliance mainly applied to washing, grading and dehydration for sand in the construction fields, sandstone factories, concrete dam fields of hydropower stations, electric pole factories for post and telecommunications, 70 sand for founding, quartz sand in glass factories and pressure sand for backfilling in oil wells and widely used for washing materials in sandstone factories, mining area, building materials, transportation, chemical engineering, water conservancy and electric power, concrete mixing stations etc.
Operating principle:
The electric motor runs slowly with the impellor after decelerated by the belt, decelerator and gears wheel. The sand and stone flow into washing launder from feeding launder, rolls with the impellor, and grinds each other. The impurity covering the sand is washing away. At the same time, add more water, the strong water flow will take away waste and some low-weight wastes from washing launder. Through the above process, the washing function is finished. The clean sand and stone is lift up by vane. When it goes up slowly, the water begins to drop through the mesh and fall back in the washing launder. On one hand, water is removed from the sand and stone; on the other hand, the water can be fully used. Finally, the sand and stone goes to the out launder from the rotary impellor to finish the washing task.
| Models | XSD2610 | XSD2816 | XSD3016 |
| Impeller Specification (mm) (D×W) | Φ2600×1000 | Φ2800×1600 | Φ3000×1600 |
| Impeller Speed (mm) | 1.178 | 1.177 | 1.179 |
| Capacity (t/h) | 20~50 | 30~60 | 50~120 |
| Feed Size (mm) | ≤10 | ≤10 | ≤10 |
| Water Consumption (mm) | 20~60 | 50~100 | 70~120 |
| Electric Motor Power (KW) | 5.5 | 11 | 15 |
| Decelerator Models | ZQ50-50-I-Z | ZQ60-50-I-Z | ZQ65-50-I-Z |
| Overall Dimensions (L×W×H) | 3255×1982×2690 | 3540×3000×2880 | 3845×3000×3080 |
