Belt conveyor its flexibility, practicality has been widely used, such as electronic factories, toy factories, shoe factories, metal plants, and other enterprises, can find it on the scene. But for the use and maintenance of many friends may not clear how, in this regard to the special introduction and share knowledge.

Principle

The main conveyor belt tables is the role of the workpiece will be transported to the next process, there is a motor powered by inverter control or regulate the speed ratio to the required speed work.

    Belt conveyor operation:

   1. Shutdown before to check on the conveyor belt damage will not obstacles. If there is, it is necessary to remove obstacles;

   2. Power shutdown before to observe whether it is normal and, if necessary, to carry out measurements deployment of equipment needed to ensure the normal voltage;

   3. Check if the equipment is normal, you can shutdown operation;

      A. using Frequency Control, please read the converter operating manuals.

      B. Controlled Speed Ratio use, operation sequence is as follows:

        Shutdown order: a control box on the Power Switch (power lights illuminated) → → buttons will be activated starting Ratio controlled rotary switch to the "ON" position → slowly rotating knob speed required speed range . Its uniform operation; Do not use more than 1,500 rpm range.

        Shutdown order: speed ratio control knob in the rotation slowly return to the "0" position → plane conveyor to be stopped after the rotation speed ratio control switch to the "OFF" position → closed activated switches and the power switch.


Plane conveyor maintenance

1. Checked daily drive motor and reducer whether the anomaly;

2. Daily check whether the belt loose, and the timely adjustment;

3. Conveyor belt monthly check whether drawl, and the timely adjustment;

4. Drum rotation monthly check whether flexible and timely repair;

5. Monthly inspections of the chain and sprocket drive anastomosis, timely adjustments and add to the chain lubricants;

6. Chuiqu monthly with an air gun control box dust to prevent failures;

7. Reducer used for the first time to be replaced after 100 hours cleaning internal gear oil, a new oil after every 2,500 hours to replace one;

8. Make a big annual maintenance, inspection accessories damage.